Safe firmware for Amiko Alien 8900
 

Safe firmware for Amiko Alien 8900

Firmware 1.2.61-Alpha version

How to uprade Alpha version firmware of SHD-8900?
1. Make a folder X:/spark to root of USB, Copy the two files userfub.img and mImage to there.
2. Press and Hold OK key then Power on receiver, you will see in Front LED display "Boot" and then "FORC", after this, Press Right key, upgrade will start..
3. It will take a long time..

With this Alpha version sw, it will be safe and not dead..
Now you can use youtube function.

Note: Don't upgrade new SW from Spark Online.
spark safe firmware amiko 8900 1.2.61.rar

Safe firmware for Amiko Alien 8900
If your Amiko Alien 8900 already dead due to software rights issue..... you can rebuild your receiver

Step I: Before repairing, pls prepare such devices,
1. Programmer: Programe the Flash IC memory.
2. Soldering Machine: You need to change IC.
3. One USB Disk with FAT32 formart.
Note: If you have new Flash memory IC from your seller, then no need Programmer.

Step II: Programe Flash Memory with Prgramer.
1. Take out your 8900HD motherboard, Check two IC in Position U12 (Spansion S29Gl064N90TFI01) and UE2(SAMSUNG K9F4G08U0B), Use your soldering Machine to take out this two IC. See Picture Amiko Motherboard.jpg.
2. Programe Spansion S29Gl064N90TFI01 IC with amiko_flash.bin file.
3. Programe UE2(SAMSUNG K9F4G08U0B) IC, Make the Flash Memory Empty ( Delete the contents inside and put inside Blank).
4. Put the repair Flash Memory back to motherboard..
Note: If you have new Flash memory IC from your seller, then no need Program the two IC, just change new IC.

Step III: Update receiver by USB.
1. Copy the userfs.img.ub, mImage, and nfs Folder files to root of USB memory, and Insert USB disk to receiver. (We porvide two rar files 1.2.61-Alpha-1.rar and 1.2.61-Alpha-2.rar here, one of them can be use for your receiver, pls try)
2. Power ON receiver, receiver will upgrade automaticly, On LED display, it will show NAND….NOY, after upgrade, it will show Good.
3. Now Restart reciever, receiver will work.
If you want to Use new 1.2.61 version sw with Youtube working, Pls don't use Spark Online upgrading, pls download Alpha version SW from here.
Pls download 1.2.61-Alpha SW from the Forum..
We will continue to release New version SW here.. Enjoy it.

http://i56.photobucket.com/albums/g1...pse37bfe28.jpg

Re: Safe firmware for Amiko Alien 8900
 

I do not understand the naming (nfs Folder files to root of USB memory) ?

Re: Safe firmware for Amiko Alien 8900
 

Re: Safe firmware for Amiko Alien 8900
 

Thanks for this useful information. Would like to upgrade my box safely.

The 1.2.61 alpha version referred to in the first item in thread is no longer available from 4shared. Can it be obtained elsewhere?

Many thanks.

Re: Safe firmware for Amiko Alien 8900
 

Visit STBFIRMWARES website for this purpose, you will find all the info for this on that website

Re: Safe firmware for Amiko Alien 8900
 

awesome

Re: Safe firmware for Amiko Alien 8900
 

i have the same problem,but my receiver is strong HD receiver 4930.
is there any procedures to do mine?
i really need your help.

Re: Safe firmware for Amiko Alien 8900
 

superbox s750 spark 7111 rescue image download help me
superboxS750 Spark all and new Version download help
thanks you replyi me
superbox s750 spark
info stb
http://i65.tinypic.com/2603lhu.jpg
stb pic
http://i63.tinypic.com/2zisl5e.jpg

Re: Safe firmware for Amiko Alien 8900
 

Invalid or Deleted File.
The key you provided for file access was invalid. This is usually caused because the file is no longer stored on MediaFire. This occurs when the file is removed by the originating user or MediaFire.

Still have questions, or think we've made a mistake? Please contact support for further assistance.

Re: Safe firmware for Amiko Alien 8900
 

New Steps, No need Programe and No need change IC in UE2 (SAMSUNG K9F4G08U0B) !


Step II: Programe Flash Memory with Prgramer.
1. Take out your 8900HD motherboard, Check two IC in Position U12 (Spansion S29Gl064N90TFI01) , Use your soldering Machine to take out this two IC. See Picture Amiko Motherboard.jpg.
2. Programe Spansion S29Gl064N90TFI01 IC with amiko_flash.bin file.
3. Put the ****** Flash Memory back to motherboard..
Note: If you have new Flash memory IC from your seller, then no need Program the two IC, just change new IC.

Step III: Update receiver by USB.
1. Copy the userfs.img.ub, mImage, and nfs Folder files to root of USB memory, and Insert USB disk to receiver. (We porvide two rar files 1.2.61-Alpha-1.rar and 1.2.61-Alpha-2.rar here, one of them can be use for your receiver, pls try)
2. Power ON receiver, receiver will upgrade automaticly, On LED display, it will show NAND….NOY, after upgrade, it will show Good.
3. Now Restart reciever, receiver will work.



Code:
amiko_flash.rar
Code:
1.2.61-Alpha-1.part1
Code:
1.2.61-Alpha-1.part2
Code:
1.2.61-Alpha-2.part1
Code:
1.2.61-Alpha-2.part2
__________________