You are Unregistered, please register to gain Full access.    
«•»World-Satellite Forum«•»  
Old 09-09-2013, 10:12   #1
Join Date: Jul 2012
Posts: 1,470
Thanks: 1,284
Thanked 4,445 Times in 1,172 Posts
Users Flag!
Post Dm 7020hd User manual

DM7020HD flashing browser

What you need to flash

You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.
You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
like HyperTerm.
You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
you need a cross cable, if you connect trough a switch/hub/router you need a normal
(non-cross) cable.
To flash a new image, you can use the second stage loader. It must be present and not broken.
The following steps assume you have a DHCP server.

  • - Power down the Dreambox, either using "shutdown" (to enter the deep-standby mode) or by
 using the power-switch. Standby is not enough!

    Press and hold the button (1) on the frontpanel.

    Switch on the dreambox, either by using the powerswitch or, in deep-standby mode,
 press the power button (4). Still, hold the button (1).

    A text "*** STOP ***" (3) should appear. If something like "/flash".. appears, you didn't
 hold the right button. Now you can release the button.
 The bootloader entered the "waiting" mode.

    Above the "*** STOP ***" text, there should appear an IP-address
 (2) (four decimal values with a dot in between). If there appears the string "dhcp" instead,
 the box still searches for a DHCP server. Wait a ***. If it doesn't change, something doesn't work with the DHCP server. Check wether network cable is plugged in etc.

  • - Now, open a browser on your PC.

    (1.) enter in the address line "http://ip/" (where ip must be replaced with the value in the LCD).

    (2.) on the bottom of the page, there's a link called "firmware upgrade". Click it.

  • - On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi" extension. You can't flash other images (like .img)!

    - Click on "FLASH!" and wait. It might take some time to upload and flash the image.

    - Switch the box off again, and on again. The new image should be flashed and working.
neno@1 is banned   Reply With Quote
Old 09-09-2013, 10:13   #2
Join Date: Jul 2012
Posts: 1,470
Thanks: 1,284
Thanked 4,445 Times in 1,172 Posts
Users Flag!
Post Re: Dm 7020hd User manual

DM7020HD flashing dreamup

How to flash your Dreambox DM7020 HD with DreamUp

First disconnect the box from main power
start the program "DreamUp

select comport
use network / no network
if network: enter the local IP from your PC, enter a remote IP for your Box

press the "Connect" - button
and then connect the box to main power
please wait now

after the flash loader is transfered into the Box select the firmware by pressing
the "Flash" - button

select the firmware and click "open"

upload starts now, please wait

Box is flashing the new firmware into the flash memory, please wait

flashing done, press "OK"
press "disconnect then exit"
restart the box
neno@1 is banned   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On


Powered by vBulletin®™
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2013 World-Satellite™
All Rights Reserved™